Aplicación del protocolo OGC Puck para instrumentación lug and playRS232 y TCPIP

Authors

  • Luis VieiraSilva
  • Joaquín del Río Fernández

DOI:

https://doi.org/10.5821/iwp.2012.13.15526

Abstract

In the small market of precision measuring instruments there is no standardization of the communication protocols used for control and instrument configuration. Each manufacturer defines their own syntax and set of commands for each instrument. Due to this particular problem it is necessary to create a communication protocol that uses a common syntax and a set of common commands in addition to the specific commands of these instruments. Such protocol is the OGC ® PUCK Protocol Standard that can be implemented in any measuring instrument or apparatus. This new protocol works through RS232 serial communication, most common for measuring instruments, but also for Ethernet communication (TCP-IP).

Issue

No. 13 (2012)

Section

Articles

License

Universitat Politècnica de Catalunya has joined the Berlin Declaration on Open Access to Knowledge in the Sciences and Humanities. This declaration proposes the universal acces to the results of scientific and technical research.

All papers presented at Martech will be published in both the UPCommons and the Martech organization web sites, the former being the institutional digital deposit of Universitat Politècnica de Catalunya (https://upcommons.upc.edu). This difussion will be made through the Creative Commons License Attribution-NonCommercial-NoDerivs 2.5 or similar (http://creativecommons.org/licenses/by-nc-nd/2.5/deed.en).

When sending the final paper, the author must agree to the conference having non-exclusive rights on this operation. The author will maintain his/her right to diffuse the paper elsewhere.